GS-Light Intelligent Tracking System Solution Multipoint Drive 2P Ⅱ Enquiry Now

Solution Intro

Self-developed unique and highly reliable multi-point transmission tracking structure system, large torque tube, structure rigidity increased by 20%, can resist greater wind resistance, each row of trackers has 3 or more drivers, which is more improved accurate tracking accuracy and structural reliability, using the most advanced wind tunnel design, can adapt to multi- angle protection strategies, specifically designed for 182mm and 210mm large silicon high- power components.

Features

  • Two artificial intelligence
  • AI control
  • Reliable and safe communication
  • Extreme weather protection
  • Wind tunnel test report
  • 600W+ Module
  • Match module length up to 2.5m
  • Reducing LCOE cost
  • Improving the efficiency by 15-25%

Application

It is suitable for various power plant projects,especially in power plants with double-sided modules or high civilconstruction costs

Technical Specs

Features
●  3 single-row drive devices,  can improve the structural rigidity of the system and the system has stronger wind resistance
●  Adopt advanced AI intelligence and double-sided tracking algorithm, higher power generation
●  The column span is larger, the number of installed machines is less, and the construction cost is greatly reduced
●  Forward-looking design, applicable to 182mm and 210mm large silicon wafer high-power components, with a maximum of 120 components
●  Differentiated column design, different pile foundations can be selected according to different geological conditions, the slope of 15% in the north and south can be realized, and the slope in the east- west direction is unlimited;
●  The system has passed third-party testing and certification such as wind tunnel and TUV to ensure stable operation of the system for 25 years;
●  It can be matched with AC or PV power supply to improve the stability of wireless transmission, take into account the laying of string and tracking cables, and greatly reduce the cost per kilowatt-hour (LCOE) of the power station.
Mechanical Aspect
Number of tracker drive modules

2X60

Material

Hot-dip galvanized steel + aluminum-magnesium-zinc plate + pre-galvanized

Number of motors per tracker

3-5

North-south land slope
<15%
Tracking range

±50°

Module arrangement
Double row vertical
East-west land slope

Unlimited

Foundation form
Static pressure pile, cement precast pile, concrete foundation
Mechanical tracking accuracy

±2°

Standard wind speed
<47m/s,3seconds gust, (customizable)

Protection wind speed

18m/s

Ground clearance
>500mm,(customizable)
Land occupation rate

30%

Grounding method

Self-grounding

Electrical Aspect
Drive way

Linear actuator drive

Motor protection
Overheat protection, overcurrent protection, self-locking protection

Motor Power

220W

Limit protection
Mechanical limit + motor hard limit + soft limit
Flat time

<8 minutes

Control mode
Independent GPS time control + tilt sensor hybrid control
Controller

MCU

Power consumption
< 0.05kWh/day
Control tracking accuracy

<2°

Power supply
String power supply/external power supply
Protection level

IP65

Communication method
LoRa/Zigbee wireless communication or RS485
Operating temperature

-40-+70℃

Signal transmission method

Wired/wireless optional

Reference Recommend

Enquiry Now INQUIRY